Need help?Do you have a question about the Generac Power Systems 3.9 and is the answer not in the manual?
General| Lubrication System | Splash |
|---|---|
| Starter System | Recoil |
| Engine Type | OHV |
| Fuel System | Carburetor |
| Oil Capacity | 0.6 L |
| Cooling System | Air Cooled |
| Spark Plug Gap | 0.76 mm |
Details on the automatic belt tensioner system, including its function and adjustment.
Covers troubleshooting common starter system issues and testing procedures.
Information regarding ignition timing, including engine firing orders and timing specifications.
General description of the 3.9L V6 engine, including its configuration and features.
Guidance on diagnosing engine malfunctions, covering common causes and recommended procedures.
Provides a chart for diagnosing common engine mechanical issues like noise, oil pressure, and leaks.
Procedure for performing a cylinder compression test to diagnose engine performance issues.
Detailed steps for honing cylinder bores, including tool usage and best practices.
Discusses indications of cylinder head gasket leaks and their causes.
Steps for removing the crankshaft, including oil pan removal and bearing cap removal.
Procedures for diagnosing and testing hydraulic tappets for noise and operation.
Steps for removing pistons and connecting rods from the engine.
Methods for diagnosing and locating engine oil leaks.
Discusses oil pressure readings and potential causes for low oil pressure.
Procedure for diagnosing and testing intake manifold leaks.
To Next Page