Generac Power Systems MLG20ICAN Specifications

MLG20 Generac Specifications Continued:
Manufactured by Magnum Power Products LLC., a wholly owned subsidiary of Generac Power Systems, Inc.
Phone; 800-926-9768 • Fax: 920-361-2214 • www.m-p-llc.com
Page 2 of 3
6/12
ENCLOSURE
 Generac Mobile Power decals
 Steel, 14-gauge, sound attenuated enclosure
o UV & fade resistant, high temperature cured, white polyester powder paint
o Insulated and baffled
o 70 dB(A) at 23 feet – prime power
 Fully lockable enclosure
 Stainless steel hinges, door latches and exterior hardware
 Emergency stop switch located on front panel
 License plate holder with light
 Multi-lingual operating/safety decals
 Document holder with operating manual including AC/DC wiring diagrams
TRAILER
 DOT approved tail, side, brake, and directional lights
o Recessed rear lights
 Transportation tie downs
 Safety chains with spring loaded safety hooks
 Single wall polyethylene fenders
 2” ball hitch
 2200 lb. leaf spring axle
 2000 lb. tongue jack with footplate
 ST205/75R15 tubeless tires – 6 ply
 48” track width
WEIGHTS & DIMENSIONS
 Dry weight: 1455 lbs (660 kg)
 Operating weight: 1853 lbs (841 kg)
 105 x 68 x 56 in
(2.67 x 1.73 x 1.42 m)
WARRANTY
 Engine and generator covered under OEM warranty – consult factory for details
CERTIFICATIONS
 CSA certified

Generac Power Systems MLG20ICAN Specifications

General

Brand	Generac Power Systems
Model	MLG20ICAN
Category	Portable Generator
Language	English