Generac Power Systems Mobile Power MMG100 - Enclosure and Trailer Specifications; Enclosure Design and Features; Trailer Components and Specifications; Weights & Dimensions

MMG100 Generac Specifications Continued:
Manufactured by Magnum Power ProductsLLC., a wholly owned subsidiary of Generac Power Systems, Inc.
Phone: 800-926-9768 Fax: 920-361-2214 www.m-p-llc.com
Page 3 of 5
4/12
ENCLOSURE
 Generac Mobile Power decals
 Aluminum, sound attenuated enclosure
o UV & fade resistant, high temperature cured, white polyester powder paint
o Insulated and baffled
o 68 dB(A) at 23 feet – prime power
 Fully lockable enclosure including doors and fuel fill
 Stainless steel hinges on doors
 Emergency stop switch located on outside of enclosure
 Central lifting point
 Multi-lingual operating/safety decals
 Document holder with operating manual including AC/DC wiring diagrams
TRAILER
 DOT approved tail, side, brake, and directional lights
o Recessed rear lights
 Transportation tie downs
 Safety chains with spring loaded safety hooks
 3” lunette ring hitch
 6000 lb. axle with surge brakes
 3000 lb. tongue jack with footplate
 ST225/75R15 tubeless tires – 8 ply
WEIGHTS & DIMENSIONS
Skid mounted
 Dry weight: 3402 lbs (1543 kg)
 Operating weight: 4361 lbs (1978 kg)
 96 x 38 x 62 in
(2.44 x 0.97 x 1.58 m)
Trailer mounted
 Dry weight: 4104 lbs (1860
kg)
 Operating weight: 5062
lbs (2296 kg)
 158 x 60 x 84 in
(4.01 x 1.52 x 2.13 m)
WARRANTY
 Engine and generator covered under OEM warranty – consult factory for details.
CERTIFICATIONS
 CSA certified