EXPLODED VIEW: EV CONBOX 390 MODULE
DRAWING #: 0J1339
GROUP A
APPLICABLE TO:
REVISION: J-1628-E PAGE 2 OF 2
DATE: 3/22/12
ITEM PART# QTY. DESCRIPTION
(1)1 0H95790ST0R 1 MD1 / MD2 CB MODULE 390 ALT
(1)2 0J17560ST0R 1 WIRE TUNNEL, MD1-2 390 ALT
3 0A4456 3 WASHER LOCK SPECIAL 3/8
4 061383 1 LUG SLDLSS 3/0-#4 X 13/32 CU
5 0E1534A 2 PLUG PLASTIC 1.50"
6 056326 2 TRIM VINYL BLACK 1/8GP (7.1”LG)
7 045772 1 NUT HEX M10-1.5 G8 YEL CHR
8 067210A 1 DECAL GROUND LUG
9 0H8006 1 DECAL CAUTION ELEC SHOCK SM
10 0A9457 1 DECAL NEUTRAL
11 0C2454 4 SCREW HWHT M6-1 X 16 N WA Z/JS
12 024526 4 SCREW HHTT 5/16-18 X 3/4 CZ
13 022129 4 WASHER LOCK M8-5/16
14 022145 4 WASHER FLAT 5/16-M8 ZINC
15 0441140781 1 WIRE ASM, GND 2/0 WIRE 3/8 LUG
16 022131 4 WASHER FLAT 3/8-M10 ZINC
17 049541 2 SCREW HHC M10-1.5 X 35 C8.8
(4)(3)(2)18 0J0455 REF BLOCK, TERM 14 POS X 8 X 1600V
(4)(3)(2)19 0J9078 REF DECAL, TB4 HV CUSTOMER CONN
(4)(3)(2)21 0J5462 REF SCREW THTT M4-0.7 X 16 ZP
22 061383 1 LUG SLDLSS 3/0-#4 X 13/32 CU
23 067210A 1 DECAL GROUND LUG
(1) SHEET METAL PARTS LISTED IN THE BOM TABLE ARE REPRESENTING GENERIC PARTS (NO COLOR).
• MANUFACTURING: FOR CORRECT MATERIAL AND COLOR REFER TO AS400 BOM.
• CUSTOMER: FOR CORRECT MATERIAL AND COLOR OF REPLACEMENT PARTS REFER TO “REPLACEMENT SHEET
METAL PARTS ORDERING GUIDE-0H7169” INCLUDED IN THE MANUAL OR AVAILABLE ON THE GENERAC WEBSITE
.
(2) WILL BE INSTALLED ON PRIMARY CB MODULES ONLY. NOT REQUIRED WITH LOAD CENTER.
(3) NOT REQUIRED IF EQUIPPED WITH LOAD CENTER.
(4) NOT REQUIRED IF EQUIPPED WITH 0J1594, KIT BATTERY CHARGER POWER CORD.
To Next Page
Loading...
