EXPLODED VIEW: EV ENGINE COMM PARTS 6.8L R/H
DRAWING #: 0J2563A GROUP D
APPLICABLE TO:
REVISION: H-9768-C Page 2 of 2
DATE: 10/10/11
ITEM PART# QTY. DESCRIPTION
(3)1 029333A 2 TIE WRAP UL 7.4"X .19" BLK (NOT SHOWN)
2 0D5418 1 STARTER MOTOR FORD V-10 ENGINE
(1)3 052625 6/11 SCREW SHC M10-1.5 X 35 G12.9
4 065386 1 HOSE COOL 5/8 ID 100R6 (14”LG)
5 087599 1 PLUG PLASTIC 3/8 NPT
6 042568 2 SCREW HHC M6-1.0 X 20 G8.8
7 0F2776A 2 BRACKET, SIGNAL CONDITIONER
(1)8 022131 8/6 WASHER FLAT 3/8-M10 ZINC
9 034339 1 BARBED EL 90 3/8NPT X 5/8
10 052648 8 SCREW SHC M10-1.5 X 20 G12.9
11 0D9913 18 SCREW SHC M8-1.25 X 35 SS
(1)12 046526 21/19 WASHER LOCK M10
13 055934M 1 CLAMP VINYL .75 X .343 Z
14 070008 10 WASHER FLAT M8 SS
15 0G0015 2 CLAMP HOSE 7/8" OD DOUBLE WIRE
16 049821 3 SCREW SHC M8-1.25 X 30 G12.9
17 022129 3 WASHER LOCK M8-5/16
18 022097 3 WASHER LOCK M6-1/4
19 052647 8 SCREW SHC M10-1.5 X 25 G12.9
20 0D2244M 1 ASSEMBLY MAGPICKUP (3/8-24 MALE)
21 070006 30 WASHER LOCK M8 SSTL
22 022473 3 WASHER FLAT 1/4 ZINC
23 0D2608 10 SCREW HHC 5/16-18 X 1/2 SSTL
24 0D5623 2 HEAT SHIELD EXHAUST
25 0D5417 REF SCREW HHC M10-1.0 X 25 G10.9
(2)26 0D3808 2 EXH MANIFOLD MACH 6.8L V-10
27 0D4255 2 GASKET EXHAUST MANIFOLD
28 070010 2 SCREW HHC M8-1.25 X 35 SS G8.8
29 0D6344 1 ASSEMBLY 6.8L FLYWHEEL (D/D UNITS)
0D6686 1 ASSY 6.8L G-BOX FLYWHEEL (G/B UNITS)
30 0D3803 1 FLYWHEEL HOUSING MACH 6.8L V10
31 0D3805 1 COVER FLYWHEEL MACH 6.8L V-10
32 0A8240 3 FLEX PLATE SAE10 2.2
021113 1 PLATE, DAMPNER RETNR
33 0E0992A 10 PLUG EXPANSION 14 OD
34 078637 A/R ADHESIVE LOCTITE 620
35 047411 1 SCREW HHC M6-1.0 X 16 G8.8
36 062303 1 ADAPTOR 1/4" NPT TO 3/8" NPT
(1)37 048191 0 / 2 DOWEL PIN M10 X 24
(1) QTY. REQUIRED FOR DIRECT DRIVE / QTY. REQUIRED FOR GEAR BOX
(2) MANIFOLD IS FLIPPED FOR 150KW UNITS OR NON-ENCLOSED.
(3) 029333A IS FOR HOLDING SENSOR TO I/N 7.
To Next Page
Loading...
