EasyManuals Logo

Generac Power Systems ST20 User Manual

Generac Power Systems ST20
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Safety
6 Water Pump
2.1.10 — Splash Hazards
Risk of eye injury. Spray can splash back or
propel objects.
Always wear safety goggles when using this equip-
ment or in vicinity of where equipment is in use.
Before starting the water pump, be sure you are wear-
ing adequate safety goggles.
NEVER substitute safety glasses for safety goggles.
NOTE: Improper treatment of water pump can dam-
age it and shorten its life.
If you have questions about intended use, ask dealer
or contact qualified service center.
NEVER operate units with broken or missing parts, or
without protective housing or covers.
DO NOT by-pass any safety device on this machine.
DO NOT operate water pump above rated head.
DO NOT modify water pump in any way.
Before starting water pump in cold weather, check all
parts of the equipment to be sure ice has not formed.
NEVER move machine by pulling on hoses. Use han-
dle provided on unit.
Check fuel system for leaks or signs of deterioration,
such as chafed or spongy hose, loose or missing
clamps, or damaged tank or cap. Correct all defects
before operating water pump.
This equipment is designed to be used with Generac
authorized parts ONLY. If equipment is used with parts
that DO NOT comply with minimum specifications, user
assumes all risks and liabilities.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Generac Power Systems ST20 and is the answer not in the manual?

Generac Power Systems ST20 Specifications

General IconGeneral
BrandGenerac Power Systems
ModelST20
CategoryWater Pump
LanguageEnglish