To Next PageTo Next Page
Need help?Do you have a question about the General International 15-035 MI and is the answer not in the manual?
General| Motor | 1/3 HP |
|---|---|
| Dust Port | 2 inches |
| Disc Diameter | 6 inches |
| Disc Speed | 3, 450 RPM |
| Table Tilt | 0 to 45 degrees |
| Type | Belt and Disc Sander |
Details the limited lifetime warranty coverage for General International products.
Outlines the 2-year warranty for products not covered by lifetime warranty.
Provides instructions and requirements for filing a warranty claim.
Lists conditions and exceptions that apply to warranty coverage.
Guidance on converting the machine's motor from 220V to 110V.
Details on proper grounding procedures to reduce electric shock risk.
Ensuring the electrical circuit can handle the machine's amperage draw.
Recommendations for using extension cords with the equipment.
Guidelines for positioning the machine in the workshop for optimal use.
Recommendations for creating a safe operational area around the machine.
Steps for mounting the sander unit onto its base cabinet.
Instructions for attaching the door knob to the cabinet.
Procedure for installing the dust outlet on the 15-035 M1 model.
Procedure to adjust the 45° bevel stop for the sanding belt table.
Steps for safely connecting the machine to a power source.
Description of the safety key switch for the 15-035DC model.
Description of the safety pin switch for the 15-035 model.
Routine checks and cleaning for maintaining the machine's condition.
Procedure for replacing worn sanding belts and discs.
Detailed steps for replacing the sanding belt.
Detailed steps for replacing the sanding disc.
