VERSION 2_ REVISION 2 - APRIL 4, 2014 (19094510)
© COPYRIGHT GENERAL INTERNATIONAL
Heavy duty open steel stand for greater
stability.
High quality conveyor belt for longer
service life.
Large hand wheel adjusts conveyor
table height.
Graduated depth scale in both inches
and metric to indicate sanding thickness.
Independent switches with removable
safety key for both conveyor motor and
main motor.
4” dust outlet.
MAXIMUM SANDING WIDTH
13” (330 MM)
MAXIMUM SANDING THICKNESS
3 3⁄4” (95 MM)
MINIMUM SANDING THICKNESS
1⁄4” (6 MM)
MINIMUM SANDING LENGTH
5” (127 MM)
DRUM DIAMETER
5” (127 MM)
DRUM SPEED
1550 RPM
FEEDING SPEED
6 TO 20 FPM (1.8 TO 6.2 M/MIN)
MAIN MOTOR
1 1⁄2 HP, 110 V, 13 A
CONVEYOR MOTOR
1⁄15 HP
WEIGHT (WITH STAND)
298 LBS (135.4 KG)
To Next Page
Need help?
General
