To Next PageTo Next Page
Need help?Do you have a question about the General International 50-175 and is the answer not in the manual?
Features a precision cast iron ribbed table slotted for miter gauge.
Includes two solid cast iron extension wings for increased surface area.
Features a heavy-duty open steel stand and frame for enhanced stability.
The power switch is conveniently located for easy access.
Equipped with a transparent blade guard, splitter, and anti-kickback device for safety.
Features a one-piece forged, precision machined arbor to minimize blade runout.
Includes a deluxe precision rip fence with 30" or 52" long rails for precise adjustments.
Features mounting brackets for storing wrenches, rip fence, and miter gauge.
Equipped with a large safety-paddle switch cover for quick shut-off.
Essential safety rules to follow before, during, and after operating the table saw.
Step-by-step guide to assembling the saw's main support stand.
Instructions for removing protective coating from the saw table and extension wings.
Steps to attach the extension wings to the table saw.
Instructions for assembling the front fence rail and guide tube.
How to affix the dust collection tray to the saw stand.
Steps to secure the saw to its stand or a custom-built bench.
Guide to installing the raising and tilting handwheels and lock knobs.
Instructions for mounting the On/Off switch onto the saw's structure.
Steps for attaching the rear fence rail to the back of the saw.
How to ensure the table insert is perfectly level with the table top.
Instructions for assembling the motor, motor plate, and belt guard.
Procedure for correctly installing a saw blade onto the arbor.
How to adjust the 45°/90° stops and the angle pointer.
Steps for assembling the blade guard and splitter components.
Guide on safely connecting the saw to the electrical power source.
Guide on how to cut wood lengthwise with the table saw.
Instructions for cutting wood across the grain to shorten its length.
How to use the miter gauge for accurate cuts and adjustments.
How to attach an auxiliary fence to the miter gauge for better support.
Techniques for accurate wood marking, considering blade kerf and pencil thickness.
Instructions for using a dado head blade for cutting grooves.
Overview of optional accessories available for the saw.
General| Brand | General International |
|---|---|
| Model | 50-175 |
| Category | Saw |
| Language | English |
