SETUP & OPERATION MANUAL
MODEL
#50-275R
10" - 3 HP CABINET SAW
LEFT TILT WITH RIVING KNIFE
SPECIFICATIONS
BLADE DIAMETER
10” (254 MM)
ARBOR DIAMETER
5/8" (16 MM)
ARBOR TILT RANGE
0° À 45° (TO LEFT)
MAXIMUM DEPTH OF CUT
AT 90°
3” (77 mm)
MAXIMUM DEPTH OF CUT AT 45°
2 1/4” (54 MM)
MAX. RIP TO RIGHT OF BLADE
30” (762 MM)
MAX. RIP TO LEFT OF BLADE
12” (305 MM)
D
ADO C
APACITY
13/16” (21 MM)
DUST POR
T DIAMETER
4" (102 MM)
ARBOR SPEED
4000 RPM
TABLE HEIGHT
36 3/4” (933 MM)
TABLE SIZE (W/EXTENSION WINGS)
44” X 27” (1118 X 686 MM)
TABLE SIZE (W/O EXTENSION WINGS)
20” X 27” (508 X 686 MM)
BASE DIMENSIONS (L X W)
23” X 22 1/2” (584 X 572 MM)
MOTOR (PRE-WIRED 230V)
3 HP, 230V 13 A
WEIGHT
371 LBS (168 KG)
FEATURES
Combination riving style splitter and see-
through blade guard with anti-kickback
pawls, and a second European style riv-
ing knife also included.
Large precision-ground 44” x 27” cast-iron
table with two extension wings.
4” dust port allows easy connection to a
dust collection system.
Magnetic safety switch with emergency
stop button for additional security
Ruggedly built saw carriage with solid
cast-iron cabinet mounted trunnions.
Large motor access door for quick clean-
ing and easier maintenance.
Convenient arbor lock for fast one tool
blade changes.
Equipped with a sturdy, easy to adjust, T-
fence design rip fence system.
Powerful 3 HP motor with multi-groove V-
belt drive for longer belt life and more effi-
cient transfer of power.
VERSION 1_REVISION 3 - November 2012
© Copyright General® International 11/2012
To Next Page
Need help?
General
