FEATURES
THIS HOLLOW CHISEL MORTISER IS MANUFACTURED AND
DESIGNED FOR SPECIALIZED WOODWORKERS.
•
Heavy duty cast-iron construction, machined with precision.
•
Head gas cylinder provides smooth performance.
•
Control rods for depth and length stop.
•
5/8” and 3/4” sleeves for chisel shank.
•
Threaded rod and vive clamp with handwheel.
•
Heavy duty rack and gear provides the entire head to lower in
order to feed mortiser accurately into workpiece.
•
Handwheels can be used to move cast-iron table in longitu-
dinal and lateral directions.
•
Enclose fan cooled motor with starter capacitor and ribbed
body for resistance and long life.
•
Switch with dust protection.
SPECIFICATIONS
1
⁄
4
” TO 1” (6 À 26 mm)
8” (200 mm)
3” (77 mm)
6
1
⁄
4
” x 10
3
⁄
16
(158 x 259 mm)
1
⁄
2
” (13 mm)
12” x 12” (305 x 305 mm)
12” x 17” (305 x 432 mm)
14
1
⁄
2
” (368 mm)
3” (77 mm)
38” (966 mm)
1720 RPM
1 HP, 115 V / 230 V, 1Ph
215 LBS (98 kg)
CHISEL CAPACITY
MAXIMUM CHISEL STROKE
DISTANCE FROM FENCE TO CENTER CHISEL
DISTANCE FROM Ø CHISEL TO TABLE (CHISEL 1/4”)
CHUCK CAPACITY
SIZE OF TABLE
SIZE OF BASE
TABLE MOVEMENT LONGITUDINAL
TABLE MOVEMENT LATERAL
OVERALL HEIGHT
SPINDLE SPEED
MOTOR
WEIGHT
To Next Page
Need help?
General
