3. Squeeze the clasp until you hear a click (see right photos on previous page),
indicating that the two halves have joined.
To detach an accessory:
1. Use the nail of your index finger to unhook the clasp, opening it up.
2. Hold the accessory’s metal stem with your thumb and index finger and slide
the accessory and clasp past the camera head.
3. Put the accessory back in the Ziploc bag it came in.
SPECIFICATIONS
Compatible with iPad, iPad2, “iPad3”, iPhone3GS, Phone 4S,
iPhone 5, iPhone 6, iPhone 6 Plus, iPod touch
(3rd, 4th, 5th generation) running iOS4.1 or
later; any device running Android 2.2 or higher
Security WiFi (WEP) password
Video Resolution 640 x 480 pixels (VGA)
Frame Rate 30 frames per second (fps)
Streaming Video Format MPEG4
WiFi Range 60 ft. (18m), max (unobstructed)
Camera Lighting Four white LEDs
Camera Head Diameter 8mm (0.31 in.)
Camera Depth of Field 2.4 in. to 10 ft. (60mm to 3m)
Camera Field of View 54°
Probe Length 2m (9.8 ft.)
Probe Minimum Bending Radius 1.77 in. (45mm)
Dust & Water Resistance Rating IP67
(Probe & Camera Head only)
Operating Voltage 3.7V internal from 5V input
Current Consumption 850 mA, max @ 5VDC
Operating Temperature 32° to 104°F (0° to 40°C)
Power Supply Rechargeable 2300 mAh Li-ion battery
with 5V/1A output
Life of Full Battery Charge 3 hours, typical
18
To Next Page
Loading...