Fig. 2. The back of the AQ150
7. Foldaway stand for table or desktop
mounting
8. Display unit Velcro mounting area
9. Mounting magnets
10. °C /°F button. Used to select displayed temperature
unit and set high and low temperature alarm limits
11. Alarm speaker
12. Battery compartment
SETUP INSTRUCTIONS
ACTIVATE THE THERMOMETER
If you are reading this, you have already removed the unit, the detachable probe, the suction cup and
the plastic bag of mounting hardware from the bubble-wrap bag. At this time, DO NOT remove the
twist tie keeping the 10-ft. probe cable in a neat bundle.
6
7
89
10
11
12
To Next Page
Loading...
