FENCE AND RAIL MAINTENANCE
Keep fence and rails clean and free of obstructions and never use force. If the fence doesn’t slide smoothly, stop
and check for obstructions.
A build-up of pitch, sap, or glue residue caused by ripping glued-up panels will tend to attract saw dust making the
fence and rails sticky and gummy and preventing them from sliding smoothly.
It is very dangerous to make rip cuts against a dirty, gummy fence as kickback and/or binding of the work and the
blade may occur.
Periodic wiping with a slightly damp rag as needed will keep your General T-Fence system clean and working
smoothly. An occasional light buffing with a small amount of paste wax is recommended.
A good choice is a silicone or Teflon based lubricant, usually sold in spray can form.
We offer a large variety of products for increased convenience, productivity, accuracy and safety when using
your saw. Here’s a small sampling of optional accessories available from your local General International deal-
er.
For more information about our products, please visit our website at www.general.ca
#B-050M, 28” X 36” EXTENSION TABLE
#50-105, 27” X 36” EXTENSION TABLE
#50-106, 29” X 36” EXTENSION TABLE
#50-115, SUPPORT LEGS
#50-025, MOBILE BASE
#B-050M - 28” x 36” extension table for General MFG 350,
650, 350R and 650R saws.
#50-105 - 27” x 36” extension table for General International
50-250 and 50-260 saws.
50-106 - 29” x 36” extension table for General International
50-270, 50-300, 50-300CE, 50-305 and 50-305CE saws.
#50-115 - Adjustable support legs for #B-050M, #50-105 and
#50-106 extension tables.
You may also want consider our model 50-030 extension
mobile base that is specifically designed for table saws with
extension tables & support legs.
Our standard mobile base model 50-025 can be used in
cases where outrigger support is not needed.
#50-030, MOBILE BASE
RECOMMENDED OPTIONAL ACCESSORIES
11
To Next Page
Loading...