General X5 User Manual

8
Using Your Detector*
‣ Press the pulse button on the control panel on top of the laser to
enter into pulse mode.
‣ Switch the detector on and move it into the path of the laser beam.
‣ Hold the detector upright for horizontal beams. Rotate the detector 90°
for vertical beams. The direction arrows will indicate the position of the
laser beam. The centre LED will indicate alignment with the beam.
MODE
MODE
*The detector is an additional accessory which can be purchased from your retailer.

General X5 Specifications

General

Brand	General
Model	X5
Category	Laser Level
Language	English