Character Replacements), and scan the value and the Save bar code from the
Programming Chart on the inside the back cover of this manual. The data
characters should then appear properly.
Code 39 Unconventional Inter-Character Gaps
Use this setting to configure the scanner to read Code 39 bar codes with uncon-
ventional inter-character gaps. Default = Off.
Trioptic Code
Note: If you are going to scan Code 32 Pharmaceutical codes, Trioptic Code must
be off.
Trioptic Code is used for labeling magnetic storage media.
Trioptic Redundancy
If you are encountering errors when reading Trioptic bar codes, you may want to
adjust the redundancy count. Redundancy adjusts the number of times a bar code
is decoded before transmission, which may reduce the number of errors. Note that
the higher the redundancy count, the longer it will take to decode the bar code. To
Code 39 Code Page
On
* Off
On
* Off
To Next Page
Loading...