Generation Lighting Kent 82029 User Manual

Installation Instructions for
Kent Outdoor Post Lantern
1.1
990OP82_29-KEN
82029, 82529
POST
GP I :ENERAL RODUCT NFORMATION
This product is safety listed for wet locations.
Incandescent version may be dimmed with a standard incandescent
dimmer. version may be dimmed with a dimmer. ConsultLED LED
lamp manufacturer for additional information.
This instruction shows a typical installation.
CAUTION RISK OF FIRE-
This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and
operation of the product and the hazards involved.
Use minimum 90°c supply conductors.
7400 Linder Ave, Skokie, 160077IL
800.969.3347
www.generationlighting.com
© 2020 Generation Lighting.All rights reserved.
The "Generation Lighting" graphic is a registered trademark of
Generation Lighting. Generation Lighting reserves the right to
change specifications for product improvements without notification.
SAVE THESE INSTRUCTIONS!

Generation Lighting Kent 82029 Specifications

General

Brand	Generation Lighting
Model	Kent 82029
Category	Outdoor Light
Language	English

Summary

Safety and Product Information

Risk of Fire Warning

Mandatory installation according to code by qualified persons; use minimum 90°c supply conductors.

General Product Details

Product safety listed for wet locations; incandescent/LED dimming compatibility noted.

Install the Fixture

Ground Connection

Connect the fixture to a suitable ground in accordance with local electrical codes.

Neutral Wire Connection

Connect the white fixture wire to the neutral power line wire using a wire nut.

Hot Wire Connection

Connect the black fixture wire to the hot power line wire using a wire nut.

Secure Fixture Base

Tuck wiring neatly, place fixture base onto post, and secure with post screws.

Install Lamp

Screw the lamp into the socket, observing maximum wattage information.

Install Top Cover

Install the top cover and secure it in place with the washers and cap nuts.