Date: 2021-08-17
Copyright of the European Union is effective (Copyright EU) (c) 2021 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
71
The SITEMONITOR 6 AUX Ports
Please note:
The AUX ports for SITEMONITOR 6 are specially build for the SITEMONITOR relay board. Even though the name implies this,
no BACS Bus Converter can be connected
The SITEMONITOR 6 can manage up to 8 outputs via the optionally available relay board. Outputs 1-4 are assigned to AUX
port 1 and outputs 5-8 to AUX port 2.
Due to this fact, the SITEMONITOR 6 has up to 8 switchable outputs that you can switch separately.
Port
The port number defines the output that is to be switched. This number is assigned hard-coded and cannot be changed.
Name
The name is freely editable and can be used, for example, to describe its function in more detail. The name entered here will be
displayed later in the sensor monitor:
With apply, the text will be saved and displayed. If there are web-proxy in use, please refresh the browser or proxy cache.
To Next Page
Loading...
Need help?
General
