Version: 2020-09-04
10
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
Differences to the CS121
• Complete rework of the menu structure: The simplified interface combines a powerful hardware to provide a significant
performance boost:
• The powerful successor of the CS121 allows configuration in real-time - necessary system services will be started or stopped
as needed. Therefore, a restart is only necessary in exceptional situations.
• Additional hardcoded user accounts according to specialized tasks:
• Engineer and Guest accounts are provided according to their tasks with limited system rights. On request the new guest
account can be set up to allow external technicians a quick information overview without the need of password entry.
• The DIP switches known from the CS121 are no longer required and changed by a comfortable slide switch in the front of the
device:
The easy-to-use slide switch will change the hardware configuration. Once the configuration state is chosen, a reboot can be
done by the removing power connection or software triggered.
• The firmware update can now be carried out inside a common browser via drag & drop. The need for external tools and FTP
access is no longer necessary.
• In case of problems with the firmware, updates or reboots can also be carried out without a complete login. To do this, use a
common web browser and enter the IP of the device followed by /update. After a successful admin authentication, the
firmware can now be updated and optionally resetted to factory settings.
• By default, auto logout is now enabled. On inactivity, the user is logged out of the system after 15 minutes.
• The power consumption of the CS141 has been reduced by a factor of 10 with a power increase and is well below the
predecessor model.
Note:
The CS121 has been discontinued in 2015 and replaced by the powerful successor CS141. The Software development was officially
discontinued in 2018 - the current firmware state is frozen. Newer UPS systems and models are not available. If you use a CS121 with a
specific UPS manufacturer for many years, it may happen that your new UPS model is not natively available even of you use the latest
firmware version.
In this case, it is advisable to move to the successor CS14.
Model overview
To Next Page
Loading...
