Version: 2020-09-04
100
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
Depending on your setting, a corresponding action will be triggered in addition to the triggered buzzer and simultaneously noted in the
event log.
Note:
You can define structured job chains by different devices connected to the CS141:
Therefore, it is possible to select the BUZZER from inside the AUX menu and trigger it and use this system state to trigger the next
event accordingly. In that case, the AUX event handling will trigger the buzzer and then the next event.
Events related to other devices
Events for this device can be performed by any device connected to the CS141.
As example, an SMS is triggered by an alarm transmitter - a buzzer - because the alarm relay has jumped to ON:
At the event RELAIS ON, click + to start the configuration dialog:
Under Job, select the job to be executed because the buzzer's relay has been triggered.
Depending on your setting, a corresponding action will be triggered in addition to the triggered buzzer.
Note:
If installed, you can also select the BUZZER via the AUX menu and may it have triggered accordingly. In that case, the AUX event will
trigger the buzzer. The fact the buzzer is triggered will be able to trigger the next event. This behavior allows you to define as many
individual events as well as event chains. You can even configure time delays ...
To Next Page
Loading...
