Version: 2020-09-04
124
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
2. By pressing the Stop button
After finishing, the data will be downloaded in the form of a packed archive for later evaluation.
3.
4.
Note:
The network tracer is usually very rarely needed. In seldom cases GENEREX technical support needs specific additional
information to locate a problem.
In this case, it is recommended to start the tracer without using filtering options. Furthermore, it turns your CS141 into a
powerful network diagnostic tool that lets you examine your local LAN:
Refer www.tcpdump.org to find extensive tutorials how to define filters in order to use the full potential of the CS141 as a
network diagnostic system.
Data evaluation
The data analyzed via diagnostic tools such as Wireshark *:
Downloaded data can be read and analyzed by special diagnostic tools such as Wireshark *:
*Wireshark is not a GENEREX product. It is available at www.wireshark.org
Delete log files
The CS141 collects and logs many data and uses non-volatile memory to store it
permanently:
These data can then be retrieved via a web browser or evaluated by diagnostic tools.
Since the log files may contain very sensitive information about a network state, it is
recommended to delete all data before re-using the CS141 Webmanager.
Networklog
Deletes any network trace data
Eventlog
Deletes all logged data according to events
Datalog
Deletes additional data of UPS measurements.
Note
Once deleted, the logfiles are gone with the wind! Normally, the CS141 provides enough space to store the data a complete lifetime
cycle. If in doubt, ensure a backup of the data files is available. Please note, there is no option to recover data on the device itself.
To Next Page
Loading...
