Version: 2020-09-04
128
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
Firmware updates
Firmware updates can be found at www.generex.de by following the download area. These
System updates are regularly provided for the CS141. In addition to general product
enhancements such as increased stability and improvements in operational and reliability,
these updates also regularly provide new features that integrate seamlessly to existing
configurations.
By default, the OEM ID 12 / GENEREX is preinstalled on delivery.
Deviations will result if you have purchased the Web Manager as part of a UPS from a
manufacturer that comes with OEM agreements.
Note:
Due to the fact CS141 is not technically locked, you can install the OEM version of another manufacturer at any time. In case of another
UPS is used, just install an according OEM firmware version.
Under Firmware, select the version you need to use and download it to your computer. Unpacking the file is not necessary.
After downloading, open the web interface of the CS141 and open Update:
Drag the downloaded, packed file directly to the provided window. With Start will trigger the update process. Before triggering the
update with Start button, you can select the following additional options:
Reset to factory settings
This option deletes all configurations during the update and returns the device to the delivery state.
Reset the network to factory settings
This option also resets the network and IP settings to factory defaults.
Note:
These two options are independent to each other to ensure not losing the IP settings. Due to this fact a factory reset using a remote
access to the CS141 is possible. Please note Reset network to factory settings needs to be de-selected if CS141 has to hold its IP
settings
Since the update is interactive, please remain on the page until you are prompted to restart the device. Under system, open about menu
to check the success of the update.
General note: Please read before flashing:
In general we recommend to use the latest firmware version:
The latest firmware version provides product improvements, new UPS models and bug fixes. Additionally, the ongoing development
process allows to deploy reguarly new functions. This ongoing development process includes to update core components or file
systems, too.
Unfortunately, some changes need are deep inside the core system. With firmware 1.82 such a step is necessary:
1. You can always update to the firmware version 1.82 or later.
2. After the update is finished, a downgrade is only allowed until firmware version 1.82.
If you want to test the new firmware on an existing device first:
To Next Page
Loading...
