Version: 2020-09-04
20
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
Before you start
Installation examples
The CS141 was designed to provide a maximum of flexibility and freedom during the installation - as a result the CS141 match the tasks
of modern UPS systems as well as expectations coming with it.
Case one:
The central part of the UPS is to ensure emergency power until the server shut down securely during main power loss.
The complete shutdown routine is controlled by the CS141, as this is a full-fledged manager that can act independently.
As an alternative to the CS141, the shutdown routine can also be initiated via the UPSMan software. Further servers need only one
more RCCMD license.
Two separate networks
It becomes more difficult as soon as emergency power coming one UPS has to ensure the shutdown of two servers inside separate
networks without linking possibilities:
In this case, the UPS becomes a central role inside the network’s emergency power security.
Since the VLANs represent physically separated own network segments, only one server can be secured by the CS141. The UPSMan
software will secure the second server:
Once Installed directly on the server, it communicates with the UPS via the COM port of the server and offers the same functionality as
the CS141 including a full support of RCCMD. Therefore VLAN 2 represents a "software only" solution that does not require a CS141 as
additional hardware.
The required RS232 connection is not available or the installation of software is not possible?
Just use servers providing 2 network cards:
To Next Page
Loading...
