v.: 2020-09-04
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
13
Console login after installation
After the VM boots successfully, you can access the console directly from the vCenter console menu:
As a default, the appliance will ask for a valid IP address. If your network provides a DHCP server,
RCCMD will automatically display the current IP address.
If there is no valid IP address by DHCP, it is necessary to manually assign an IP address. in the appendix, you will find
information about the procedure
Post installation console login
You can log on to the RCCMD appliance directly from the web console:
User: admin
Password: RCCMD
Gaining root privileges
The VMware Appliance is based on a Linux Debian 9 - The
root privileges allow the manual re-installation of official
packages as well as advanced configuration of the network
interfaces.
command: sudo su
by default settings, admin has not been granted system privileges to make changes - you need to assign increased system
privileges by using the Linux command sudo su.
The installation of the RCCMD appliance is now complete. For further configuration, refer the web interface. A
configuration guide for assigning an IP address manually can be found in the appendix to this manual.
To Next Page
Loading...
