v.: 2020-09-04
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
15
RCCMD quick configuration guide
Web Login: RCCMD
To access configuration screen of RCCMD, open a web browser and proceed to the IP address of you RCCMD installation:
https://<IP address of the RCCMD appliance >
Use the default credentials to log in:
User: admin
Password: RCCMD
Before starting any configuration, RCCMD displays the current terms of use. Accepting them is required for using RCCMD
software.
You may read the end user conditions and then click on the Accept button. The configuration dialog will proceed after accepting
the end user license agreement
Next, RCCMD will prompt you to enter a valid license key:
Please note that the key used by RCCMD installation will work with
these conditions:
1. One Key – one RCCMD installation
You can use any number of RCCMD clients in your system. In
general, the prerequisite is that only one unique key will be used for
one RCCMD client. If a key will be accidently assigned twice, the
RCCMD client that launches first will claim the license. The
following RCCMD clients starting up will recognize a claimed
license and will show an according log entry:
In case of using a key valid for a certain number of installations, only the according number of RCCMD installations will be
activated with this appropriate key.
Please note, the demonstration key itself is a unique basic key that will be used for any installation:
You cannot use more than one RCCMD trial versions in one network.
To Next Page
Loading...
