v.: 2020-09-04
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
19
RCCMD requires the following information:
HOST / IP name
Normally, we recommend using the IP address of the
RCCMD host here. You can, however, also enter the host
name itself.
User
A user with the appropriate system privileges to shut down
the VMware environment accordingly.
Password
The password assigned to the user that allows RCCMD to
authenticate itself as authorized.
The next step will determine how much time RCCMD should allow the virtual machines to quit before the ESXi host powers
down:
Virtual machines take different amounts of time to shut down and shut down properly. The exact time, how long a machine
needs, is very individual and depends strongly on the task and the promised hardware. To prevent data loss or damage to the
virtual machine, the host can be instructed to give the machines a proper time window to shut themselves down before shutting
down itself.
Shutdown delay indicates the time in seconds that the host waits before being turned off.
The Default setting is 90 seconds - virtual machines taking more will be turned off due to the fact the ESXi host powers down.
You can check the access data with Check Values:
If the test was successful, press Save Changes to exit the configuration dialog.
Click on Verify to confirm the entered ESXi data as verified server.
You will notice that at the bottom right the Save Changes has changed color:
You will notice that at the bottom right the Save Changes has changed color:
You have made a change that requires RCCMD to be restarted to permanently save the inputs and apply them to the active
configuration. This process is indicated by the green button.
To Next Page
Loading...
