v.: 2020-09-04
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
50
RCCMD Bindings
RCCMD Bindings is a sophisticated tool that helps you to limit traffic. Since this setting deeply affects your network setting, it
should be used with caution. The bindings allow forcing RCCMD to listen on a specific network card. In case of multihoming is in
use, the listener can be configured to a specific IP address within one network card. As an example, this will be used if there is
a necessity to divide the network logically into a production network and an infrastructure network via VLAN:
In this example scenario, two or more network adapters can be installed. Binding RCCMD to one specific network card will
prevent users to access the RCCMD client and accidentally shut down a server - this is only possible via devices that are
located in VLAN 3 or have been properly enabled via a router.
To Next Page
Loading...
