v.: 2020-09-04
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
56
RCCMD FAQ’s
Setting up IP address data manually
In some cases, a network design may not provide a DHCP server:
The carrier system starts, but without receiving a valid IP address RCCMD may use. Since the 100% availability of a DHCP
server can never be given, it is advisable to assign a static IP address here. Search for the file interfaces – this file is
responsible to manage dynamic or static IP address entries.
You need two commands to find required files:
Command: cd /etc/network
Command: ls
The RCCMD appliance uses nano - a small and handsome editor to help viewing and editing files.
Command: nano interfaces
The editor opens and displays the contents of the file Interfaces:
To Next Page
Loading...
