Version: 2020-09-04
29
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
DHCP mode during initial configuration
While booting in DHCP mode, an according server assigns an IP address to the CS141 device. This IP address can be found
comfortable by using the freeware tool Netfinder.
Therefore, it is easy to identify the device by the MAC address shown by Netfinder and the address label glued on the CS141 device:
The function open device opens a separate web browser and inserts the IP address automatically.
After login, it is possible to access network settings and change the IP address. after rebooting the device with manual mode setting,
new IP address setting is active. By switching back to DHCP mode, these settings are completely ignored and the CS141 falls back to
server-assigned address.
The advantage is as many CS141 into the network at the same time without much effort, which are immediately accessible without the
possibility of an address conflict. The disadvantage is the fact that in DHCP mode the IP addresses can change dynamically, which
means that higher-level or docked shutdown solutions may no longer be able to access or output errors.
Advanced basic settings
For this configuration step, navigate to the following menu:
Enter Location settings
Location data can be read by any software supporting this feature. If used in larger installations with many devices, location data will
help to associate installed devices.
Apply will save the settings and restart according services to activate the new settings instantly. Netfinder will find the new name next to
the IP address:
To Next Page
Loading...
