Version: 2020-09-04
62
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
Premium feature: The RFC1628 UPS interface
In some cases, UPS manufacturers supply systems that the CS141 cannot communicate to. As an example, known problems are the
card does not fit to the slot, or that the data stream sent by the UPS is not compatible formatted:
UPS manufacturers have installed their own SNMP card, which offers similar functions but may not be compatible to your flexible and
powerful GENEREX software environment. To ensure compatibility, the CS141 Web Manager offers the option to connect to any card
via SNMP. The condition is that the RFC 1628 MIB is supported by the target card. In order to use this function, it is first necessary to
configure a corresponding SNMP Agent at the target UPS.
After that enter the access data in the CS141 UPS menu. The CS141 will restart required services an establish a connection to the
destination card.
Setting up the target SNMP card with SNMP v2 at CS141
Model
Choose SNMP UPS-RFC 128 compliant as UPS model
SNMP-Version
Depending on the configuration of your target SNMP card, choose SNMP version 1 or 2
SNMP Community
Enter the SNMP Community configured at target SNMP card
Save/Abort
Abort will withdraw all settings, save will restart required services. After restarting the services CS141 will automatically establish a
communication to target SNMP card.
To Next Page
Loading...
