Generex CS141 - Page 79

Version: 2020-09-04
79
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
CS141 as RCCMD Server device
Ever heard something about RCCMD?
RCCMD (Remote Console Command) is the world's most successful shutdown solution for heterogeneous networks and is the best
method to ensure initiating multiple messages and shutdown sequences. The solution integrates even the UPS to set up an all-in-one
monitoring and messaging solution:
The RCCMD clients listen on port 6003 for incoming messages of RCCMD server module. This module is a general part of
- UPSMAN software
- CS121
- CS141
- RCCMD licensed UPS manager.
An RCCMD server controls the RCCMD clients inside networks. The functional scope ranges from monitoring, notifications up to a
structured shutdown of a multiple server environment. RCCMD even considers mutual dependencies.
Note:
The RCCMD client is not freeware
A separate license is available and can be obtained worldwide from licensed resellers, OEM partners or directly ordered at
www.generex.de.
The license itself is unlimited valid, the service scope includes 2 years of free updates from the date of purchase.
Available RCCMD commands for the CS141
As mentioned, CS141 provides an RCCMD server.
The RCCMD commands are defined as jobs via the system events. There are four different categories available:
➔ RCCMD Shutdown
The RCCMD shutdown sends a signal to an RCCMD client. The RCCMD
client advice the server to initiate the shutdown sequence.
➔ RCCMD Message
An RCCMD message is a notification text that can be sent to an RCCMD
receiver. This text will be displayed on the screen using a separate message
box.
➔ RCCMD Execute
If scripts have to be executed in advance for a shutdown, they can be
triggered by using the execute command. RCCMD offers not only ready-
made commands but also the possibility to start own scripts.
➔ RCCMD Trap
Trap messages are pure informational messages that can be sent to
RCCMD clients. The client receives these text messages and displays them
inside a pop-up message box.
Note:
An initiated RCCMD shutdown cannot be withdrawn. However, within the RCCMD client, you can also define so-called redundancies
and limit IP addresses that are authorized to send an RCCMD signals. By doing so, as an example, two UPSs need to advice a server
shutdown. In this case the RCCMD execute wakeup will withdraw a server shutdown command.