Version: 2020-09-04
98
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
Buzzer
The CS141_BUZ is an acoustic alarm to be used with the CS141 SNMP adapter (CS141 SC or CS141 L). The CS141_BUZ is based on
a piezo element using an internal power supply. Due to this fact, no separate power supply is required. The volume is about 85 db. The
CS121_BUZ provides an RJ12 to be directly connected to CS141. Furthermore, an RJ12 socket for the output of PINs 1, 2, 3 to use
external devices.
In addition, the acoustic signal of the buzzer can be remotely reset by closing a potential-free contact via the two-poled contact terminal
block. Furthermore, a LED indicates a manually switched off alarm. This LED will stay blinking until it will be triggered by CS141 to
normal state.
Technical data:
voltage usage: 12 – 15 VDC
power usage: ca. 30mA
Volume: ca. 85 dB
Connection type: wired, RJ12, 6_5, 5_m
Dimensions: 70 x 70 x 40 mm
Connect to CS141:
Use enclosed cable to connect the buzzer CS141_BUZ to AUX Port of CS141.
Configure the buzzer:
Step: 1
Under Devices/Setup, select Buzzer at COM and press Apply.
To Next Page
Loading...
