5
OPERATION OF IGNITION SWITCH
ON “Start” position
z Engine can be started in this position.
z Ignition switch key can not be removed.
OFF “Stop” position
z Engine is shut off and can not be started in this position.
z Ignition switch key can be removed.
LOCK “Lock” position
z Turn the handle all the way to left, then press down the
key and turn the key to the “LOCK” position on the left.
z In this position, the handle is locked and the key can be
removed.
z To unlock, simply turn the key from “LOCK” to “OFF”.
CAUTION:
z Never operate the ignition switch key when the motorcycle is running. To turn the ignition
switch to “OFF” and “LOCK,” will shut off the electrical system and that may result in a dangerous
accident. Therefore, the ignition switch can only be turned off after the motorcycle has been
completely stopped.
z Always remove the key and be sure to take the key away with you after locking the steering
handle before leaving your motorcycle.
z If ignition switch remains in the “ON” position for a prolonged period after the engine has been
stopped, the battery’s capacity will be reduced and this may affect the engine’s start ability.
USE OF BUTTONS
High beam changing switch
Turn signal switch
Horn switch
Headlight switch
Start button
Symbol pictures for explanatory purposes used above!
Ignition Switch
To Next Page
