EasyManuals Logo

Genesis 6.1e User Manual

Genesis 6.1e
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
ver 1.0
44
absolute fidelity
You will want to sit eight to twelve feet (2.4 to 4 metres) away from the
speakers.
18”
8’ to 10’
Toe in by 5
o
1.3 Connections
For most applications, the speakers should be plugged directly into the
output your power amplifiers using high quality speaker cables and the
5-way binding posts. The speakers has a set of Thru-Put binding posts.
These are for connecting to an optional ServoSub™. As the Thru-Put
binding posts are internally connected in parallel, DO NOT use them for
bi-wiring or bi-amping.
1.4 Adjustments
Don’t be too worried by the midrange and tweeter adjustment knobs on
the back of the G6.1e. The G6.1e will sound great, straight out of the
box, with these both set at the 12 o’clock position. As you play your
system for the next hundred hours or so, the speakers will settle in.
Once you familiarize yourself with their performance, putting a little bit of
additional effort in tuning the speakers properly into your system (which
includes the room) will give you greater long-term enjoyment and
benefits.
Typical room placement: Place speakers about 18 inches
into the room, the tweeters on the inside, 5 to 6 feet
apart, and 8 to 12 feet from the listeners. Toe-in the
speakers by about 5 degrees towards the listeners.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Genesis 6.1e and is the answer not in the manual?

Genesis 6.1e Specifications

Frequency and Sensitivity IconFrequency and Sensitivity
frequency response48Hz to 36kHz, +/- 3dB
sensitivity89 dB 1 watt 1 meter
Power IconPower
minimum power (tube)75 watts per side
maximum power (tube)500 watts per side
minimum power (solid state)100 watts per side
maximum power (solid state)1000 watts per side
Impedance IconImpedance
high level input impedance4 ohms (Nominal)
Transducers IconTransducers
HF transducersTwo Genesis 1” Circular Ribbon Tweeters
midrange transducersOne Genesis 5 “ titanium cone midrange
bass transducersTwo Genesis 6.5” aluminium cone
Weight and Dimensions IconWeight and Dimensions
height41 ¾ ”
width10 ¼ ”
depth14”
weight79 lbs (36kg) per side

Related product manuals