Fixed Installation
Considerate Hint:
All Fixing Screws must be tightened.
Ceiling
Wall
Surface
Wall-mount
Plate
Fan Body
At least
30 cm
At least
45 cm
SPEED ADJUSTMENT
Switch on/off the fan and Adjust to the desired speed
by pulling the switch cord (B).
0---Off 1---Low
2---Medium 3---High
OSCILLATION CONTROL
Pull switch cord (C) to start and stop fan oscillation.
TO ADJUST THE WIND DIRECTION
Push the guard lightly to the desired up or down direction.
BC
1
0
0
1
22
3
3
OPERATING INSTRUCTION
4
MOUNTING ON THE WALL
Secure the supplied bracket (A) on the wall by using
wooden screw or plastic screw, make sure the wider
opening should be upward, insert the hook of the wall
fan into the bracket slot.
To Next Page
Loading...
