5-89
Driving your vehicle
5
Warning message
Blind-Spot Collision Warning
(BCW) system disabled. Radar
blocked
This warning message may appear
when:
- One or both of the sensors on the
rear bumper is blocked by dirt or
snow or a foreign object.
- Driving in rural areas where the
sensor does not detect another
vehicle for an extended period of
time.
- When there is inclement weather
such as heavy snow or rain.
If any of these conditions occur, the
light on the BCW/BCA switch and the
system will turn off automatically.
When the BCW canceled warning
message is displayed in the cluster,
check to make sure that the rear
bumper is free from any dirt or snow
in the areas where the sensor is
located. Remove any dirt, snow, or
foreign material that could interfere
with the radar sensors.
After any dirt or debris is removed,
the system should operate normally
after about 10 minutes of driving the
vehicle.
If the system still does not operate
normally have your vehicle inspected
by an authorized retailer of Genesis
Branded products.
✽✽
NOTICE
Turn off the BCW, BCA and RCCW,
RCCA system when a trailer or car-
rier is installed.
- Press the BCW/BCA switch (the
indicator on the switch will turn
off)
- Deactivate the RCCW system by
deselecting 'User Settings
→→
Driver Assistance
→→
Rear Cross-
Traffic Collision Warning'
ODH048593L
To Next Page
Loading...
