2-19
02
Return function
Press the switch (2) to adjust both
the front passenger’s seat and the
rear seat, as follows.
• Rear seat
- Sedan, Limousine
(3-seat configuration)
1. The seat position is adjusted to the
rearmost position, the seat cush-
ion tilt is adjusted to the lowest
position, and the lumbar support
decreases.
2. The headrest is lowered, and the
seatback (including the shoulder
portion) is leaned backward.
- Limousine (2-seat configuration)
1. The leg support moves down and
slides backward.
2. The seat position is adjusted to the
rearmost position, the seat cush-
ion tilt is adjusted to the lowest
position, and the lumbar support
decreases.
3. The headrest is lowered, and the
seatback (including the shoulder
portion) is leaned backward.
• Front passenger’s seat
1. The seat position is adjusted back-
ward.
2. The seat cushion height is raised,
and the headrest is adjusted to the
lowest height.
Information
Return function switch for adjusting
the front passenger's seat do not oper-
ate in the following situations.
- When the Engine Start/Stop button
is in the OFF position.
- A passenger occupies the front pas-
senger's seat.
- An item occupies the front passen-
ger's seat.
- The front passenger's door is open.
- The front passenger's seatbelt is fas-
tened.
• Do not re-press return function
switch again, while operating
the seat positions for relaxation
mode. It may abruptly stop the
seat movement.
• When you operate the control
switch while adjusting the seat
positions with return function
switch, it stops the automatic
seat position adjustment. In this
case, manually adjust the seat
positions.
NOTICE
i
To Next Page
Loading...
