2-41
02
Pre-Active Seat belt (PSB)
(if equipped)
The purpose of the pre-active seat
belt is to tighten the seat belt when a
collision is sensed, during emer-
gency braking, or when a loss of
control is sensed.
The pre-active seat belt is a sup-
plementary system. The pre-active
seat belt activates only when the
passenger is wearing his/her seat
belt.
The pre-active seat belt warning will
turn on if there is a problem with your
pre-active seat belt.
We recommend that the system be
checked by an authorized retailer of
Genesis Branded products if the
warning message comes on while
the vehicle is in motion. When the
PSB warning message disappears,
the master warning light ( ) will
illuminate.
In order to maximize the safety of the
passenger, the pre-active seat belt
system operates as below.
• Full retraction
The seat belt is tightened when:
- Emergency braking situation occurs
- Losing control of the vehicle
- The vehicle senses a collision
- Driving on a slippery frozen road
• Slack removal
Tightens a loose seat belt if vehicle
speed is over 15 km/h (9.3 mph).
• Belt parking
Tightens a loose seat belt when
the seat belt is unfastened.
NOTICE
OHI046144L
OHI036106
To Next Page
Loading...
