Need help?Do you have a question about the Genesis GBG600L and is the answer not in the manual?
General| Type | Angle Grinder |
|---|---|
| Voltage | 120V |
| Speed | 11000 RPM |
| Frequency | 60 Hz |
| No-load speed | 11000 RPM |
| Wheel Diameter | 100 mm |
| Disc diameter | 100 mm |
Mandatory use of safety goggles or glasses with side shields to prevent eye damage.
Exposure to dust from sanding, sawing, grinding, and drilling can cause cancer or reproductive harm.
Ensures a clean, well-lit area and keeps others away for safe operation.
Covers plug compatibility, protection from water, grounding, cord care, and proper power supply.
Emphasizes alertness, use of safety equipment, and appropriate clothing.
Covers preventing accidental starts, removing tools, maintaining balance, and proper handling.
Properly securing workpieces and avoiding forcing the tool for safe operation.
Guidelines for proper tool maintenance, using correct tools, and recommended accessories.
Covers correct feeding, unattended operation, and avoiding contact during startup.
Importance of qualified repair and using identical replacement parts for safety.
Regular servicing and careful cleaning to prevent damage and ensure continued operation.
Guidelines for choosing the correct wire gauge based on load and length for safe operation.
Ensures secure mounting, unplugging for maintenance, and wearing proper attire.
Verification of guards, eye shields, and using correctly rated attachments and flanges.
Proper tightening of wheel nuts, inspection of wheels, and adjusting tool rest distance.
Addressing wheel vibration, defective switches, and safe operation of the on/off switch.
Covers proper stance, wheel usage, workpiece pressure, and avoiding hazardous materials.
Ensures secure workpiece holding, dust cleaning, and addressing damaged parts.
Advises against wet conditions and reiterates grounding requirements for safe operation.
Lists all items included in the package, such as the grinder, guards, rests, and hardware.
Instruction to check for missing or damaged parts before assembly or operation.
Step-by-step guide for correctly attaching and adjusting guards and shields.
Instructions for mounting and adjusting tool rests for proper grinding operations.
Guidance on securing the grinder to a workbench for stability and determining optimal placement.
Detailed steps for safely removing and installing grinding wheels, including flange usage.
Check for loose screws, damaged wiring, worn wheels, or binding parts before each use.
Instructions for operating the power switch and understanding the function of work lights.
Importance of keeping wheels dressed for balance, accuracy, and longevity.
Methods for truing and dressing wheels that are out of balance or worn.
Guidance on sharpening common tools like chisels and blades using the grinder.
Warning against grinding aluminum or magnesium due to potential hazards.
Techniques for sharpening lawn mower blades, including balancing after sharpening.
Step-by-step guide and tips for freehand sharpening of twist drill bits.
Techniques for sharpening chisels and plane irons, including bevel creation and honing.
Procedure for reshaping worn or bent screwdriver tips for proper fit.
Guidance on cleaning plastic parts and handling tools used with abrasive materials.
Note that the tool is permanently lubricated and requires no additional lubrication.
Details the warranty period, coverage, exclusions, and non-transferability.
Contact information for customer support and website for product inquiries.
To Next Page