English
8V Lithium-ion Rotary Tool
Operator’s Manual GLRT08B-65
WARNING:
DO NOT engage the shaft lock while the tool is running.
WARNING:
Avoid excessive tightening of the collet nut. Do not over tighten the
collet nut when no bit is inserted.
BALANCING
To balance an accessory:
OPERATING SPEEDS
Switch Setting Speed Range RPM
0-1 8,000 – 10,000
1-2 10,000 – 12,000
2-3 12,000 – 14,000
3-4 14,000 – 16,000
4-5 16,000 – 18,000
10