Need help?Do you have a question about the Genesis GMT15A and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Voltage | 120V |
| No Load Speed | 11, 000 RPM |
| Spindle Thread | 5/8"-11 UNC |
| Wheel Diameter | 4-1/2 inches |
Provides guidance on selecting and using extension cords for the tool, emphasizing safety and proper sizing.
Instructions for attaching saw blades and scraper blades to the tool's shaft flange.
Guide for mounting the sanding pad and applying sandpaper to the tool.
Explains how to turn the oscillating tool on and off using the switch.
Details on using flush cut blades for precise cuts in various materials and tight spaces.
Describes using the tool as a detail sander for wood, plastic, and metal in hard-to-reach areas.
Covers removing vinyl, paint, caulk, and adhesives using scraper blades.
Instructions for using a grout removal blade to clear out grout lines.
Guidelines for cleaning the tool, avoiding certain chemicals that can damage plastic parts.
States that the tool is permanently lubricated and requires no additional lubrication.
Details the warranty coverage, exclusions, and contact information for claims.
Provides the contact number for customer support and questions regarding Genesis products.
To Next Page
