Need help?Do you have a question about the Genesis GHD1260 and is the answer not in the manual?
General| Tool Type | Heat Gun |
|---|---|
| Voltage | 120V |
| Cord Length | 6 ft |
| Weight | 2.2 lbs |
| Temperature Settings | 2 |
| Cable Length | 6 ft |
Lists essential technical details like model, power, speed, and capacity.
Emphasizes reading the manual and general safety advice before operating the tool.
Stresses wearing safety glasses/goggles and hearing protection for safety.
Covers 18 essential safety guidelines for tool operation and workshop safety.
Continues essential safety guidelines including tool usage, maintenance, and environment.
Warns about dust hazards, including silica and asbestos, and advises on ventilation and protection.
Provides a table and guidelines for selecting the correct wire gauge for extension cords.
Details specific safety precautions for using hammer drills, including grip and footing.
Covers safe practices like trigger lock usage, hand placement, and securing the workpiece.
Explains the trigger switch, lock-on button, and variable speed control functionality.
Describes the function of the forward/reverse lever for drill direction selection.
Explains the two modes: rotation-only and rotation with hammering action.
Provides step-by-step instructions for installing and removing drill bits using the chuck key.
Explains how to use the depth gauge for repetitive drilling to a specific depth.
Offers tips for drilling into concrete and masonry using the hammer drill mode.
Provides guidance on drilling various materials using the rotation-only mode.
Details techniques and precautions for drilling into metal surfaces.
Outlines the terms and conditions of the product's two-year warranty.
Provides contact information for customer support and product inquiries.
To Next Page
