English
8V Lithium-ion Rotary Tool
Operator’s Manual GLRT08B-65
• Wire and bristle brushes must never be operated at speeds greater than
15,000 RPM
•
Wear protective gloves and face shield when using wire or bristle brushes.
•
When using grinding wheels or similar attachments,
•
Handle sharp bits with care and never use dull or damaged bits
•
Always use clamps or similar devices to secure the work-piece at all times
•
Always inspect the work-piece before cutting
•
Never start the tool when the bit is engaged in the work-piece.
•
Always use the proper direction of feed when carving, routing or cutting.
•
If the bit becomes jammed or bogs down in the work-piece, turn the tool
“OFF” with the switch.
•
Do not leave the tool running unattended!
•
Do not grind or sand near flammable materials.
•
Do not touch the bit or collet after use
•
Do not alter or misuse the tool.
•
This product is NOT intended for use as a dental drill in human or veterinary
medical applications.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER &
BATTERY
• Save these instructions.
•
Before using the battery charger,
•
Use only the charger
•
Do not recharge the battery in damp or wet environments.
•
Do not operate the charger with damaged cord or plug.
6
To Next Page
Loading...
