Genesis GV60 - Page 12

Quick Reference Guide I 20
19 I Quick Reference Guide
GENESIS GV60
FEATURES AND CONTROLS
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
To view the ‘Climate’ setting:
Press Home button –> swipe pages
–> select Climate
AIR INTAKE CONTROL
HEAT BUTTON
DRIVER ONLY
To manually control
the system, push the
HEAT button to turn
the heater on.
Air from the passenger
compartment will be recirculated
through the system and heated or
cooled according to the function
selected.
Air enters the vehicle from outside
and is heated or cooled according to
the function selected. This is the
default setting whenever the HVAC
system is first turned on.
If you press the DRIVER
ONLY button, the
Climate settings are
focused only on the
driver’s side. No air will
be directed to the vents
on the passenger side.
REAR WINDOW DEFROSTER
Press to activate/
deactivate the rear
window defroster.
Outside (fresh) air
position
Recirculated
air position
AUTOMATIC CLIMATE CONTROL SYSTEM
1
Driver’s Temperature controls
2
Passenger’s Temperature controls
3
Fan Speed controls
4
Driver’s Mode selection
5
Passenger’s Mode selection
6
AUTO (Automatic control with low/
med/high settings)
7
OFF (System off)
NOTE: To reduce the tendency of the glass fogging and also to improve
visibility, keep the interior surface of the windshield clean by wiping it with a
clean cloth and glass cleaner. In addition, select air intake control to the
outside (fresh) air position whenever possible while operating the vehicle.
DEFOGGING DEFROSTING
3. Press the defroster
button (
).
3. Press the defroster
button (
).
2. Select the desired
temperature.
2. Set the temperature
to the extreme hot
position.
4. Fresh mode will
be selected
automatically.
4. Fresh mode will
be selected
automatically.
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
1. Select the desired
fan speed.
1. Set the fan speed to
the highest (extreme
right) position.
AUTOMATIC HEATING / AIR CONDITIONING
2. Set the temperature
control to the desired
setting.
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
1. Press the
AUTO
button.
Automatically controls the mode, fan speed, air intake, and air
conditioning to maintain the selected temperature.
SYSTEM OFF
Pressing the OFF button will place the system in the
OFF mode.
• Blower will turn off.
• Outside (fresh) air position will be selected.
• Vented air will be at last set temperature.
Changes the direction of the air flow as follows.
MODE SELECTION
3
4
5
7
6
8
9
10
12 1314
1
11
2
8
Air Intake control (Fresh/Recirc)
9
Front Windshield Defroster
10
Rear Window defroster
11
SYNC
12
A/C (Air Conditioning)
13
HEAT button
14
HVAC Settings (DRIVER ONLY)
►
►
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO
OFF
SYNC
AUTO