Quick Reference Guide I 32
GENESIS GV60
31 I Quick Reference Guide
DRIVING
BLIND-SPOT COLLISION-AVOIDANCE ASSIT (BCA)
Blind-Spot Collision-Avoidance Assist is
designed to help detect and monitor
approaching vehicles in the driver’s blind spot
area and warn the driver of a possible collision
with a warning message and audible warning.
To turn on/off select or deselect
‘Driver Assistance → Blind-Spot Safety’ from
the Settings menu to set whether to use each
function.
REAR CROSS-TRAFFIC COLLISION-
AVOIDANCE ASSIST (RCCA)
RCCA is designed to help detect vehicles
approaching from the left and right side while
your vehicle is reversing.
LANE KEEPING ASSIST (LKA)
The Lane Keeping Assist will
automatically assist the driver’s
steering to help prevent the vehicle
from departing the lane.
LKA operates when the vehicle
speed is between 40 mph and 110
mph.
• To turn on the LKA, Press and hold
the Lane Driving Assist button.
• To turn off the LKA, Press and hold
again.
NOTE: In some circumstances, LKA may not activate as intended.
Ex: blurred lane conditions, backlight, heavy fog, reflection of light due
to water on the road, sharp bends in the road, etc.
Please refer to the Owner’s Manual for more information.
FORWARD COLLISION-AVOIDANCE ASSIST (FCA)
Forward Collision-Avoidance Assist is
designed to help detect and monitor the
vehicle ahead or help detect a pedestrian or
cyclist in the roadway and warn the driver that
a collision is imminent with a warning message
and warning and apply emergency braking.
Setting Forward Safety function
With the vehicle on, select or deselect ‘Driver
Assistance
–
>
Forward Safety’ from the
Settings menu to set whether to use each
function.
Active Assist- Braking assist or steering assist
(if equipped) will be applied depending on the
collision risk levels.
Warning Only- Braking assist is not applied
Off- System deactivates
HIGHWAY DRIVING ASSIST (HDA) (if equipped)
Highway Driving Assist helps keep the
vehicle between lanes, maintain a distance
with the vehicle ahead, and automatically
adjusts the vehicle speed to the speed limit
while driving on the highway.
With the vehicle on, select or deselect 'Driver
Assistance → Driving Convenience' from the
Settings menu to set whether to use each
function.
- If Highway Driving Assist is selected, it
helps maintain the selected distance to the
vehicle ahead, maintains the set speed,
and helps center the vehicle in the lane.
NOTE: If the vehicle is
turned off then on again,
HDA maintains the last
setting.
Operation:
• Driving on the highway main road.
- Vehicle speed is under 120 mph (200 km/h).
• Press the Driving Assist button on the steering wheel.
- If entering the main road of highways while SCC and LFA is
operating, HDA will be automatically activated.
If HDA is operating, the indicator on the cluster will illuminate green.
To Next Page
Loading...
