Genesis GV60 - Page 8

Quick Reference Guide I 12
11 I Quick Reference Guide
GENESIS GV60
FEATURES AND CONTROLS
HOMELINK WIRELESS GARAGE CONTROL SYSTEM
1
4
2
5
3
6
7
Press and release button
1
,
2
, or
3
.
• If the indicator
7
illuminates and is orange, go to programming
mode.
• If the indicator
7
illuminates and shows a solid or flashing green
light, go to erasing mode.
Erasing Mode
Press and hold the button you wish to program for approximately 15-25
seconds, until the LED flashes orange several times. This indicates any
prior programming has been erased.
Programming Mode
Hold the original garage door opener/transmitter near the HomeLink
Mirror.
Press and hold the original transmitter button until the HomeLink
indicator
7
shows a solid green light, or flashes green for
approximately 10 seconds. This indicates that the programming has
been completed.
NOTE: If the indicator
7
flashes green continuously but the garage
door opener does not operate, please follow the Rolling Code
Programming steps.
Two-Way Communication
Some new garage door openers come equipped with a two-way
communication feature. If your garage door opener has this feature,
follow the Rolling Code Programming steps.
For more information and programming tips on two-way communication,
visit: www.homelink.com/compatible/two-waycommunication or
call: 800-355-3515
Rolling Code Programming
• You may need help from a second person.
• You may need a ladder to access your garage door opener.
• Be prepared: some of the steps are time-sensitive.
1. Firmly press and release the “Learn”, “Smart”, or “Program” button
on the garage door opener located on the ceiling
8
, while the
HomeLink indicator
7
flashes green. Once the button is pressed,
you have approximately 30 seconds to initiate the next step.
2. Return to the vehicle, press the HomeLink button firmly, hold it
for two seconds, then release. This can be repeated up to three
times. Do not press the HomeLink button rapidly. At this point, the
programming is complete, and the feature should operate properly.
For more detailed information, please refer to your owner’s manual, or
visit: www.homelink.com/compatible/two-waycommunication
or call: 800-355-3515
Indicator
4
- Flashing orange → Closing
- Solid Green → Closed
4
6
NOTE: If your garage door opener has two-way communication
functionality, it is possible for HomeLink to stop operating correctly
shortly after programming, if the initial programming was not completed
properly. If you experience this, completing the steps described in
“Programming a New HomeLink Button” and “Two-way Communication
Programming” will restore the garage door function.
Indicator
6
- Flashing orange → Opening
- Solid Green → Opened
8