FEATURES AND CONTROLS
Quick Reference Guide I 04
03 I Quick Reference Guide
GENESIS ELECTRIFIED GV70
FRONT SEAT ADJUSTMENT
2
Forward and backward
1
Seat cushion length
(for driver’s seat)
Seat cushion support
(for driver’s seat)
2
2
Seatback angle
3
Seat cushion height
1
Lumbar support
Ergo-Motion seat
(if equipped)
6
Ergo-Motion seat (if equipped)
6
4
Seat bolster adjustment (for driver’s seat)
5
1
3
4
5
HEADREST ADJUSTMENT
Adjusting the height up and down
To raise the head restraint:
1. Pull it up to the desired position
1
.
To lower the head restraint:
1. Push and hold the release button
2
on the head restraint support.
2. Lower the head restraint to the
desired position
3
.
To Store Settings
1. Shift to P (Park) while the Engine
Start/Stop button is in the ON
position.
2. Adjust the driver’s seat position,
outer side view mirror position,
steering wheel position.
3. Press the SET button. The system
will beep once and notify you
‘Press button to save settings’ on
the cluster LCD display.
DRIVER POSITION MEMORY SYSTEM (if equipped)
NOTE: Transmission must be in P (Park).
NOTE:
To reset the system,
please refer to the Owner’s
Manual.
To Recall
Press the desired memory button (1 or 2). The system will beep once.
4. Press one of the memory buttons (1 or 2) within 4 seconds. The system
will beep twice when the memory has been successfully stored.
5. ‘Driver 1 (or 2) settings saved’ will appear on the cluster LCD display. The
message appears only for the driver’s seat position memory setting.
Ergo-Motion seat
automatically adjust the
driver seat during long
drives. After driving for an
hour, the Smart Posture
assist automatically adjusts
the pelvis and back portion
of the driver’s seat.
Setting can be activated/
deactivated from the
settings menu.
1
2
3
6
To Next Page
Loading...
Need help?
General
