25
English
Press the iPod key on the remote control and the LED Display under the grille should
display “iPod”. If the display does not lit up, check that the AC power cord is correctly
inserted in to functioning AC outlet.
Step 2. Press the Play key on the remote control or press the key next to the Universal
Dock. If you still cannot hear any sound check that the volume is turned up by adjusting
the “+” volume key.
Step 3. You can navigate your iPod using the Stop, Play/Pause, Skip/Fast Forward,
Skip/Fast Reverse keys on your remote control.
Step 4. The iPod is charging when placed in the Universal Dock and the System
is powered.
To Next Page
Loading...
