Genius BRAIN 04 User Manual

ISTRUZIONI PER L’USO - NORME DI INSTALLAZIONE
INSTRUCTIONS FOR USE - DIRECTIONS FOR INSTALLATION
INSTRUCTIONS - REGLES D’INSTALLATION
INSTRUCCIONES PARA EL USO - NORMAS PARA LA INSTALACION
GEBRAUCHSANLEITUNG - ANWEISUNGEN ZUR INSTALLATION
GEBRUIKSAANWIJZINGEN – INSTALLATIEVOORSCHRIFTEN
BRAIN 04BRAIN 04
BRAIN 04BRAIN 04
BRAIN 04
24V / 115V24V / 115V
24V / 115V24V / 115V
24V / 115V
BRAIN 03BRAIN 03
BRAIN 03BRAIN 03
BRAIN 03
24V / 230V24V / 230V
24V / 230V24V / 230V
24V / 230V
BRAIN 03BRAIN 03
BRAIN 03BRAIN 03
BRAIN 03
24V / 230V24V / 230V
24V / 230V24V / 230V
24V / 230V
BRAIN 04BRAIN 04
BRAIN 04BRAIN 04
BRAIN 04
24V / 115V24V / 115V
24V / 115V24V / 115V
24V / 115V

Genius BRAIN 04 Specifications

General

Interface	USB
Buttons	12
Type	Gamepad
Analog sticks	2
Vibration	Yes
Compatibility	PC

Summary

IMPORTANT NOTICE FOR THE INSTALLER

GENERAL SAFETY REGULATIONS

General safety rules to follow for proper installation and use.

1. GENERAL CHARACTERISTICS

2. TECHNICAL SPECIFICATIONS

3. PRELIMINARY SET-UP

4. CONNECTIONS AND OPERATION

4.1. TERMINAL BOARD CN1

Power supply, batteries, accessories, and earth connections.

4.2. TERMINAL BOARD CN2

Connections for gearmotors, electric lock, and light outputs.

4.3. TERMINAL BOARD CN3

Connections for motor limit-switches and encoders.

4.4. TERMINAL BOARD CN4

Connections for pulse generators, stop, and safety devices.

5. INSTALLING THE RADIO CONTROL RECEIVER BOARD

6. OPERATION WITH ENCODER OR AMPEROMETRIC OPERATION

7. CONTROL LEDS

8. OPERATION OF DISPLAY

9. ADJUSTING THE OPERATING PARAMETERS

10. PROGRAMMING

11. OPERATION OF ELECTRONIC CLUTCH

12. PROTECTION FUSES

13. CONNECTION LAY-OUT

14. FUNCTION LOGICS

Automatic "A" logic C=1 d=0 E=0

Details of the Automatic "A" logic, including pulse and safety device reactions.

Stepped Automatic "AP" logic C=1 d=1 E=0

Details of the Stepped Automatic "AP" logic, including pulse and safety device reactions.

Semi-automatic "E" logic C=0 d=0 E=0

Details of the Semi-automatic "E" logic, including pulse and safety device reactions.

Stepped Semi-automatic "EP" logic C=0 d=1 E=0

Details of the Stepped Semi-automatic "EP" logic, including pulse and safety device reactions.

Condo "D" logic C=1 d=0 E=1

Details of the Condo "D" logic, including pulse and safety device reactions.

EC COMPLIANCE DECLARATION