Genius JA382 User Manual

APPARECCHIATURA ELETTRONICA PER CANCELLI SCORREVOLI 230V
CONTROL BOARD FOR 230V SLIDING GATES
PLATINE ELECTRONIQUE POUR PORTAILS COULISSANTS 230V
EQUIPO ELECTRÓNICO PARA PORTONES CORREDIZOS 230V
ELEKTRONISCHES GERÄT FÜR SCHIEBETORE 230V
ISTRUZIONI PER L’USO – NORME DI INSTALLAZIONE
USE AND INSTALLATION INSTRUCTIONS
INSTRUCTIONS POUR L’EMPLOI – NORMES D’INSTALLATION
INSTRUCCIONES PARA EL USO – NORMAS DE INSTALACIÓN
BETRIEBSANLEITUNG - INSTALLATIONSVORSCHRIFTEN
SPRINT 382
SPRINT 382

Genius JA382 Specifications

General

Brand	Genius
Model	JA382
Category	Controller
Language	English

Summary

IMPORTANT NOTICE FOR THE INSTALLER

General Safety Regulations

General safety rules and obligations for installers of the automated system.

1. WARNINGS

2. TECHNICAL SPECIFICATIONS

3. LAYOUT AND COMPONENTS

4. ELECTRIC CONNECTIONS

4.1. Connection of photocells and safety devices

Instructions for connecting various photocells and safety devices to the control board.

4.2. J7 Terminal board - Power supply

Details on connecting the power supply to the J7 terminal board.

4.3. J6 Terminal board - Motors and flashing lamp

Instructions for connecting motors and flashing lamp to the J6 terminal board.

4.4. J1 Terminal board - Accessories

Instructions for connecting accessories like push-buttons to the J1 terminal board.

4.5. Connector J2 - Radio-receiver Module Connection

Instructions for connecting a 5-pin radio-receiver module to the J2 connector.

4.6. Connector J6 - Limit-switches Connection

Instructions for rapid connection of opening and closing limit-switches to J6.

4.7. Connector J3 - Encoder Connection

Instructions for rapid connection of the optional encoder to the J3 connector.

5. PROGRAMMING

5.1. BASIC PROGRAMMING

Procedure for accessing and setting basic programming functions.

5.2. ADVANCED PROGRAMMING

Procedure for accessing and setting advanced programming functions.

6. START-UP

6.1. INPUTS CHECK

Checking the status of input LEDs and their relation to signal inputs.

7. AUTOMATED SYSTEM TEST